Stress Test conducted through automated robotic arm solution.

Allion’s HIL Simulation Test System can overcome the difficulties in setting up real-time environments for prototypes, while shortening the timetable of software and hardware development and verification. It can simulate real situations through information and control systems via voltage/pointer/signal, and then verify whether the behaviors of the systems and control algorithms meet functional safety requirements while satisfying product verification for the needs of front-end and back-end markets at the same time, thereby providing accurate and efficient solutions.

In the era of high-speed transmission, Allion is committed to the research and development of PCIe high-speed transmission interface technology. Allion has developed numerous high-frequency testing fixtures for M.2, U.2/U.3, EDSFF E1, and OCP NIC 3.0. Through Allion’s resource integration services and comprehensive validation programs, you can shorten product development timetables significantly.

The simple interface automates complex PCIe specification tests, reducing the time required for device calibration and testing, providing a fast and flexible way for product developers.

After the environment is set up, the test can be automated from the Rx switch channel to the transmission speed, saving 20 times the time.

Our automated test solutions verify high-speed signal transmission, maximize the use of test equipment, eliminate the lack of operation, and ensure that the performance exceeds the passive cable.

HDMI compatibility test can be performed on source device (Source), terminal device (Sink), repeater (Repeater) and cable (Cable).

Our Smart Factory IIoT Production Line Monitoring Solution can oversee anything from multi-point factories to product status. It offers all-in-one tracking and control of production line dynamics, enabling real-time emergency debugging.

Allion’s visual identification can be applied in numerous situations, such as the system identifying specifications and results for power supply connectors, calculating the testing time and quantity of inspections of product lines, etc., which greatly saves the time and potential errors of manual inspection.

For the verification of USB4 Gen3 cables and connectors, the CAMS automated testing equipment developed by Allion has a clear interface and is easy to assemble, and the test is more efficient, which will effectively reduce the time cost and equipment loss caused by frequent plugging and unplugging

The automated system is used for testing various parameters of wireless mouse power consumption (via Battery Life Test), to replace the time necessary for manual testing and provide more accurate information obtained mechanically than those obtained from manually-recorded data, which can reduce product testing timelines.

DPI is measured through high-precision machines to prevent mouse products from having unforeseen drift failures caused by external environmental influences or different power stages.

Allion Radio Frequency (RF) Validation enhances your products, so they can give the best experience to users even under external interferences.

By using exclusive development systems and automated testing equipment, we perform inspections with incremental pushes and pulls on gamepads while recording the stability of coordinates. The level of precision in this solution is unattainable by human labor.

To eliminate user problems in a TV product, vendors must undergo ample testing in situations that users encounter. Allion DisplayAI Test Solution for Remote-Controlled Product can assist vendors to do so.

The AI Agent controls the test equipment, fixtures, and customized test scripts, realistically simulating user behavior and specific repetitive actions when checking display parameters to ensure user’s positive experience.

The UR Robot is used to press on the headset at regular intervals, testing the headset for items such as headset volume or audio notification changes. This prevents testing fatigue in personnel who wear headsets for long hours, so as to improve the accuracy and quality during product testing.

Allion presents the Allion Wireless Equipment TR-398 (AWE TR-398), providing to you a brand new way of wireless quality validation testing. It is a wireless performance test solution which tests with 32 real Wi-Fi 6 client devices based on the Broadband Forum’s TR-398 Issue 2 Corrigendum 1 Specification. Future TR-398 test cases are also possible through test suite upgrades.

Allion developed the Multi-System Test Platform capable of performing multiple system tests simultaneously. Difficult to track manually, the system shows real-time system statuses such as: power usage, repetitive power on/off, multiple program activation stage, and many more. The platform can shorten product testing timetables.

In the Smart Lab Information Management System, one can view multiple dashboards and back-end controls, keeping a record of personnel, devices, standardized products, or other lab activities, so as to eliminate risks and uncertainties caused by manual records.