New Spec Update

Bluetooth｜Nov.

● SIG has released Bluetooth Channel Sounding Technical.

Bluetooth｜Oct.

● Bluetooth SIG will be hosting a live online webinar on 23 October to walk through the recent updates to the Qualification Process

Bluetooth｜Aug.

● Bluetooth Member Summit + UPF Testing Event

  • The event will be held at the Westin Bellevue
  • From 9-14 September 2024

Bluetooth｜Jul.

● The new Bluetooth Qualification Process went into effect 1 July 2024.

-

HDMI ｜Sep.

● The HDMI Forum Releases Version 2.1b of the HDMI® Specification.

  • Aug 10, 2023
    The HDMI Forum has published Version 2.1b of the HDMI Specification which is available to HDMI 2.x Adopters. This includes a general clean up, clarifications to improve interoperability, and incorporation of errata.

HDR10+ ｜Oct.

● Allion can provide HDR10+ Projector and SSTM(Gaming) Certification Test Service from now on.

HDR10+ ｜Aug.

● Allion is authorized by HDR10+ Technologies LLC to provide SSTM and Projector certification service NOW.

Intel EVO (Project Athena) IAT Test｜Jun.

● Intel EVO System Design Spec. 5th Edition rev.1.0 released in May 2024 for Lunar Lake and Arrow Lake Platforms.

Intel EVO (Project Athena) Audio Test ｜Jan.

● The SPET 2.0.618 has been released, which targets on the EVO system design specification 5th edition - lunar lake and Arrow Lake platforms.

● MIC/Speaker POLQA is the new added item in this release.

Matter｜Jun.

●  CSA Member Meeting – Washington, DC

  • Jun 24-27, 2024

  • Washington, DC

Matter ｜Mar.

● Mar 5th -12th 1.3 SVE (Specification Validation Event)

  • Potential Locations
    »San Francisco, CA
    »China

● Mar 18th – 21st Member Meeting

  • Singapore

PCI Express｜Jul.

● PCI-SIG Compliance Workshop #130

  • July 29 - August 2, 2024
  • Embassy Suites San Francisco Airport
  • South San Francisco, California – New Location!

● PCI-SIG Developers Conference Korea 2024

  • September 26, 2024       
  • Seoul, South Korea
  • Sofitel Ambassador Seoul Hotel

● PCI Express Card Electromechanical Specification Revision 6.0, Draft 0.9

  • Review period closes on Monday, August 26, 2024

PCI Express｜May.

● PCIe 6.0 Preliminary FYI Workshop

  • Date: June 3 –  7, 2024
  • Location: Embassy Suites San Francisco Airport, South San Francisco, California

PCI Express｜Apr.

● PCI-SIG Compliance Workshop #129

  • April 22 - April 26 2024
  • Embassy Suites San Francisco Airport

● PCI-SIG Developers Conference 2024

  • June 12-13, 2024
  • Santa Clara Convention Center

● ​PCI Express Card Electromechanical Specification Revision 6.0, Draft 0.7

  • Review period closes on Friday, April 5, 2024

●  PCI Express Base Specification Revision 7.0 Version 0.5

  • Review period closes on Wednesday, May 1, 2024

Thunderbolt｜Nov.

● For TBT5 devices with using Barlow Ridge B1 step:

  • 100% EV+FV subsidy: Pass EV and FV tests by Oct. 31, 2024.
  • 50% EV+FV subsidy: Pass EV and FV tests by Dec. 31, 2024.

* No any subsidy for TBT5 devices with using B1 step in 2025.

● For TBT5 devices with using Barlow Ridge B2 step:

  • 50% EV+FV subsidy: Pass EV and FV tests by Q2, 2025.

Thunderbolt｜Oct.

● Intel extends the TBT5 device subsidy 100% to Oct. 31.

Thunderbolt｜Aug.

● Thunderbolt products must use certified TBT4 orTBT5 connector, and there is no transition period and exception from now on.

● Barlow Ridge PRQ date: 2024.07.30

Thunderbolt｜Jul.

● Thunderbolt 5 devices have switchable PCIe or M.2 slot will not be approved to get Thunderbolt certification at this point.

USB｜Nov.

● USB-C® Cable and Connector Specification Release 2.4

USB｜Aug.

● RFI Testing Required for Gen 1 (5Gbps) and up capable End-Product USB Type-C hosts and peripherals

  • Applicability table in specification will be updated to reflect this.

USB｜Jul.

● USB-IF Implementing - EU Common Charger “Meets” compliance program for IEC 62680 (USB Specifications) is coming

  • The USB-IF has begun the process of implementing an EU Common Charger “Meets” or “Conforms” (naming is still TBD) to the EU Common Charger Directive for IEC 62680 (USB Type-C® and USB Power Delivery Specifications).

USB｜Jun.

● Allion Labs Taiwan is approved for USB 3.2 Gen 2x2 Host and Peripheral testing.

● The products below must attend the PIL for certification, if it is the company's first USB4 certification.

  • USB4 v1 Silicon Hosts and Hubs/Docks

USB ｜Mar.

● Allion Labs is now authorized to fully certify USB4 v1 capable products.

 ● Allion Labs is now authorized to test and certify USB Type-C Shared Capacity products.

AdaptiveSync ｜Jan.

● Adaptive-Sync Dual Mode certification starts from now on

AdaptiveSync ｜Oct.

● AdaptiveSync 1.0 certification stepped down already, so products need to be tested to CTS 1.1 requirement only right away.

AdaptiveSync ｜Jul.

● Adaptive sync CTS 1.1 certification service starts as of June.

  • AdaptiveSync CTS 1.0 certification might step down in August.

● AdaptiveSync certification service starts now in Allion China.

-

-

Wi-Fi｜Nov.

● Wi-Fi CERTIFIED WPA3 has been updated to include an optional capability RSN Overriding (RSNO), in support of a WPA3-Personal compatibility mode.

● Wi-Fi Test Suite v10.22.3 software packages support automation updates for Wi-Fi CERTIFIED WPA3 and Forward compatibility.

● QuickTrack Test Tool R2.2.2 maintenance release and support for Forward Compatibility.

Wi-Fi｜Oct.

● Wi-Fi Alliance Europe Member Meeting

  • 15-17 October 2024
  • Malaga, Spain

Wi-Fi｜Aug.

● The WFA announces:

  • Wi-Fi EasyMesh Specification v6.0
  • Wi-Fi EasyMesh Test Plan v6.0»This update shall be effective December 31, 2024.

    »Beginning December 31, 2024, all new Mesh tested devices must support in this version.

Wi-Fi｜Jul.

● Wi-Fi Alliance has identified that some Wi-Fi 7 devices have incorrectly implemented the Multi-Link Operation (MLO) setup.

● Wi-Fi 7 test bed device software packages have been updated to fix incorrectly implemented Multi-Link Operation Setup (MLO).

Wi-Fi｜Jun.

● Wi-Fi CERTIFIED WPA3 and Wi-Fi Enhanced Open Deployment Guide has been published.

Wi-SUN｜Apr.

● April 24th – 25th Member Meeting

  • Kyoto, Japan

Contact us

At Allion, our commitment to serving our global customers and fulfilling our corporate responsibility mission drives us to establish local bases worldwide. Our goal is to provide prompt service to our valued local customers, offering comprehensive product testing, customized application solutions, and expert engineering consulting services.

Inquiry